The 4 channel NVRs are capable of recording at 4K resolution at 20 frames per second, 4K live display, H 265+ recording, and 80 Mbps data/processing speeds. The 4 channel NVR has one hard drive bay that supports up to 16TB of storage capacity on a SATA III hard drive. Supports AI by camera: Face detection, SMD, and SMD smart search by vehicle and human. 1x HDMI for high definiton 4K output and 1x VGA for 1080p output. The MTT8095 employs smart dual illumination which activates on motion and deploys a warm light, this provides extra active deterrence while also giving the camera more light to better view the area. This feature can also be useful for simply illuminating dark areas as a small floodlight. This feature can be set to work in tandem with SMD+, this means dual illumination will only activate when there is a human or vehicle detected.
- 8-MP 1/2.7” CMOS image sensor, low luminance, and high definition image.
- Outputs max. 8 MP (3840 × 2160) @20 fps, and supports 2688 × 1520 (2688 × 1520) @25/30 fps.
- H.265 codec, high compression rate, ultra-low bit rate.
- Built-in warm light/IR LED, the max. illumination distance is 30 m and the max. warm light distance is 30 m.
- ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments.
- Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.
- Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human).
- Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection.
- Supports max. 256 G Micro SD card; built in MIC.
- 12 VDC/PoE power supply, easy for installation.
- IP67 protection.
- SMD Plus.
- New 4.0 user interface, Security baseline 2.1
- H.264, H.265, Smart H.264+, and Smart H.265+. H.265 auto switch
- Max. decoding capability: 8 × 1080p@30 fps. Supports adaptive decoding
- Supports mainstream cameras of ONVIF and RTSP protocols
- P2P remote surveillance, video play on mobile device
- VGA/HDMI simultaneous video output, maximum resolution of HDMI is 4K
- AI by Camera: Face detection, perimeter protection, IVS, people counting, heat map, and SMD
- Supports remote configuration and management of IPC, such as set ting parameters, getting information, and upgrading IPC of the same model in batches
- Includes-
- MNR8041X-4 NVR
- 1TB Surveillance Grade HDD
- MTT8095-AI-SMD-DI Cameras
- 100ft Cat5e Cable per camera
- HDMI Cable and Network Cable
- USB Mouse
- Camera mounting template decal
- Screws and Anchors
- Allen Wrench
- Water Resistant Casing for PoE connection
